Tactile indicators australia, northern territory, western australia, queensland, tasmania

Stainless steel GRIP DISCS

Grip disks adhered (epoxy fixed) to slippery floor surfaces. Provides extra grip to ground surface substrates. Useful in areas such as: Shopping centres, train stations, supermarkets, ramps, steps etc.

Grip Discs:

Material: Stainless steel

Dimensions: 25mm diameter, 2.0mm thickness

Color: Stainless steel lustre

Underside: Flat (textured)

Suitable substrates for installation: Slippery concrete, terazzo, timber, glass, ceramic tile surfaces

Location: Exterior, interior

Installation: Epoxy fixed direct to substrate (epoxy supplied with Grip Discs). Or use of double sided VHB tape.

Application: Adding grip to floor surfaces.

Suitable areas: Shopping centres, supermarkets, train stations, ramps, steps, slippery areas.

Slip resistance rating: R12 (product surface design rating). Oil/ Wet ramp test = R10 (tested on porcelain tile, with design layout of 150mm spacing off-set with a 50mm drop spacing). A higher R-rating can be expected with closer spacings.

Installation: Installation templates, and diamond etching bits available. Epoxy adhesive supplied with Grip Disc orders.

Grip disks, stainless steel disk adhered to floor surfaces

Stainless steel grip discs installed in slippery areas, adds grips to fllors

HOME PAGE

DISCRETE TACTILE INDICATORS

INTEGRATED TACTILE INDICATORS

STAIR NOSING PRODUCTS

ANTI SLIP / NON SLIP TAPES

REFLECTIVE TAPES

TACTILE BRAILLE SIGNS

INDUSTRIAL GRATINGS

ENTRANCE MAT SYSTEMS

DOUBLE SIDED TAPES

SKATEBOARD DETERRENTS

GRIP DISCS

INSTALLATION SERVICES

ONLINE STORE

CONTACT US

TGSI PTY LTD

ABN: 15 121 583 257

COPYRIGHT © 2012